|
|
maxum Line Array System
|
The PSE-audio maxum three way bi-amp Line Array cabinet is designed on the
technology of Line Array physics. The use of neodymium drivers minimizes
weight and space. It conforms to an important element of Line Array physics.
Considerable investment has been made in the construction of the maxum system.
The result of this investment is the high directivity of the high-mid horn which
gives maximum output with harmonic distortion, and a system that exactly couples
together for precision HF slot aperture.
Attention has been made to the design of the loudspeaker placement. Designed
to be lightweight with a special integrated suspension system, the maxum is
very easy to set up and it´s compact size takes up a little size when transporting.
The maxum system has been designed to deliver high quality performance of
music and speech in variety applications, including large auditoriums and stadiums.
Housing:
Trapezoidal casing assembly with birch multiplex plywood and
coated with high strength structural varnish. Through the
2 x vertical setting angle of 3° each at cover and bottom of the
box, arise a maximum vertical setting angle of 6° between two Systems,
with a minimum spacing between the system components to each other.
the maxum have an integrated flying system which is executed
with eight connector frames each.
In combination with the Quick Release Pins and the connector
joints is an easy and fast system building guaranteed.
The PSE-audio Installer Bar decrees with the same link technique
as the speaker systems itself, the advantage is the connector elements
are equal!
The setting angle is adjustable from 0°to 6° in 1° steps over
the defined transit-holes.
|
|
The smallest setup at the PSE-audio Line Array maxum System work with 4 maxum
Line Array cabinets.
2 x maxum are linked and work together parallel
PSE - Terminal:
The PSE connector terminal is recessed in the housing. The user has the possibility
to use 4pin or 8pin connectors, so he is flexible in the choice of the cables.
The parallel connectors allows to connect further maxum system cabinets.
There is the possibility to drive one maxum speaker stack with just one PSE
speaker feed line.
|
Technical Data
|
maxum
|
|
Sensitivity
1W/1m (LF / MF / HF)
|
(98 / 108 / 112) dB/W/m
| |
Frequency
response
|
50Hz 19kHz
| |
Continuous
power rating
RMS(LF / MF / HF)
|
(900 / 400 / 300) W
| |
Limit power
rating Peak (LF / MF / HF)
|
(1800 / 800 / 600) W
| |
Sound presure
cont/peak
|
137dB / 140dB
| |
Impedance
(LF / MF / HF)
|
(8 Ohm / 8 Ohm / 24 Ohm)
| |
directional
response horiz./vertical(1 x maxum)
|
90°
h / 06° v
| |
component
parts
|
2 x 15" Neodymium Basslautsprecher Bandpass Technologie
2 x 8" Hochleistungs Lautsprecher mit Kommpressions Hornaufladung, Spezielles Line Array Wave Guide mit 3 x 1,5 " Neodymium Kompressionshochtontreiber
| |
casing
|
Birkenmultiplex Sperrholz
| |
surface
|
strapazierfähiger Strukturlack
| |
form
|
Trapezförmiges Gehäuse
| |
front covering
|
Stabiles Metallgitter, ballwurfsicher mit 10mm
Akustikschaumstoff bespannt
| |
mounting
|
Integriertes PSE-audio easyfly Flugsystem
| |
physical
size (WxHxD)
in cm
|
120 cm x 47 cm x 60 cm
| |
weight
|
75 kg
| |
connections
|
2 x 8 pol. Speakon Buchsen und
2 x 4 pol. Speakon Buchsen
| |
accessories
|
PSE-audio -Installer Bar, maxum Verbindergelenke,
Quick Release Pins
|
|
