The SB15 is a compact bandpass bass cabinet. In the SB15 works a high power neodymium 15“ bass speaker. The neodymium speaker saves weight and makes the SB15 very interesting for mobile using.  The very small housing is perfect and special tuned for this speaker. This is the reason for the good low frequency bass performance of this small bandpass cabinet.

The SB15 has in the standard version 9 M8 metrical mounting points. The mounting points could be used to fly the SB15. The mounting points are placed in a wise which allows to tighten the SB15 by fixed installation on the floor with a special angle aluminium with non-damage of the housing. Also the mounting points could be used to built a solid bass block with some SB15 cabinets for this is only a exterior steel or aluminium work necessary. PSE tender a lot of accessories. There is a tripod mounting bracket in the lid of the housing for a tripod for a High/Mid speaker cabinet.

The SB15 is also like all other PSE cabinets made of birch multi ply and painted with a hardwearing structure finish. All fittings are recessed. The speaker, tripod mounting bracket and the rubber foots are fixed with metrical screws. The SB15 is manufactured with the same high quality standard as the big PSE PA-cabinets. PSE does not make any compromise by sound and quality by the small speaker cabinets.

The SB15 bass cabinet is recommended as a subwoofer for the High/Mid cabinets GS26, GS10 and GS12Eco. Also you can use it for all other High/Mid cabinets of the PSE GALAXY-Series as a bass extension.

Features:

• 9 mounting points M8
• 1 x 15“ high power neodymium
• bass speaker
• 2 x 4pin Speakon
• 2 x 8pin Speakon
• Bass link function
• High/Mid link function

Application:

• Bass cabinet for mobile PA´s
• Bass cabinet for fixed PA installation

Location:

• Live Event
• Discotheque/Nightclubs
• Clubs
• Background Entertainment parks
• Theme parks

Example Systems for the SB15:

GS26S:           2 X GS26,       1 X SB15

GS26SP:         2 X GS26,       2 X SB15

GS10S:           2 X GS10,       1 X SB15

GS10SP:         2 X GS10,       2 X SB15

GS12ecoS:     2 x GS12eco,   2 x SB15

PSE-Terminal:

The PSE connector terminal is recessed in the housing.

The user has the possibility to use 4pin ore 8pin connectors so he is flexible in the choice of the cables. The parallel connectors allows to connect a further SB15 cabinet or a High/Mid cabinet. There is the possibility to drive one PSE speaker stack ( for example one SB15 and one GS10) with just one PSE speaker feed line.